In this article we review the Sennheiser HD 660S2 headphone. It is selling for $599,95 USD.
Disclaimer: The Sennheiser HD 660S2 was sent to us by the local Sennheiser press agency in exchange for this review. Sennheiser is not related to Headfonia in any way.
Sennheiser has been around since like forever and they’re one of the most respected companies in audio. In the past, Sennheiser has impressed us with a lot of top-quality products like the HD800, the HD 800S and many 5XX and 6xx series headphones. Sennheiser has also upped their IEM game and they have successfully launched the IE 200, IE 300, IE 600 and IE 900 inear monitors.
We’ve of course featured and reviewed Sennheiser products on multiple occasions and you can find all of our Sennheiser reviews here.
In today’s review we’ll be taking a closer look at the HD660 S2, their new full sized, open headphone. The HD 660S2 is the successor of the HD 660S that was launched back in 2018 already, and it’s a direct competitor to the iconic HD 600 and HD 650 as well. Before continuing with the HD 660S2 review, I suggest reading up on the original HD 660S first. You can find that review here:
I’m also glad to see that Sennheiser after a few years will finally be present again at the High-End Munich show. The Sonova takeover surely has something to do with that. I for one look forward to visiting the new Sennheiser booth in Munich next week.
The new Sennheiser HD 660S2 features a 38mm transducer and it has ultra-light aluminum voice coil with 300Ohm impedance for excellent impulse response (150Ohm before). Of course, the HD 660S2 still is an open back design headphone and it features Sennheiser’s uniquely powerful vented magnet system for minimized distortion.
“Dive deeper into legendary sound”
For the HD660 S2, Sennheiser revised the coil of the S2, and it now matches the 300-ohm impedance of the legendary HD 600 & HD 650. This new coil also provides higher magnetic force and electrical dampening for cleaner impulse response. The surround – according to Sennheiser – is now more compliant too, dropping the resonant frequency to 70 Hz. Considerable effort also went into optimizing the airflow around the transducer. There’s more sensitivity over the entire frequency spectrum because the magnet´s air gap works more efficiently now. Taken together, these measures result in even greater precision, speed, and resolution — with double the sound pressure at the lowest frequencies.
The biggest impact of all this is on the lower frequencies, and the HD 660S2 now shows more extended sub bass. Sennheiser states that this extension on the low-end changes everything: “by creating more space for the sound, against a deeper backdrop, the highs feel more brilliant, the soundstage deeper, and the emotions stronger”.
Transducer principle: dynamic, open
Transducer size: 38 mm
Frequency response: 8 – 41,500 Hz
Impedance: 300 Ω
Sound pressure level (SPL): 104 dB (1 kHz, 1 Vrms)
Total harmonic distortion (THD): <0.04% (1 kHz, 100 dB)
Ear coupling: Over-Ear
Adapter: 6.3 mm (1⁄4 inch) to 3.5 mm
Connector: 6.3 mm (1⁄4 inch) jack plug, 4.4 mm balanced plug
Cable length: 1.8m
Country of origin: Ireland
Magnetic field: 4.5mT
The Box, Accessories & Price
The HD 660 S2 is officially selling for $600 USD, but it can be found online for $500 USD. The price of the original HD 660S has now dropped to just over $300 USD. The box the HD 660S2 comes in is very basic, especially for the price it is selling for. In fact, it’s very much like the HD 560S box. Is it important? No, as it’s just a box. Yes, at the whole package needs to be good.
On the inside of the box, we have multiple things:
- The HD 660 S2 headphone
- A 3.5 mm adapter
- A soft carry pouch
- One 6.3 mm cable (1.8 m – much shorter than with the HD 660S)
- One 4.4 mm cable (1.8 m – much shorter than with the HD 660S)
- One 6.3mm to 3.5mm adapter
- Quality certificate
- Quick guide
All-in-all the package is very complete, especially with the double cable option and the 3.5m adapter. With such a complete set of accessories ze immediately forget about the less impressive box. A lot of amplifiers only feature an XLR balanced connection, so you might need to get an adapter for that. I am using the adapters from Venture Electronics.
The article continues on the second page. Click here or use the jump system below.
Page 3: Sound pt. 2, Comparisons
Page 4: Synergy, Conclusion